When I was starting out with column drills, I discovered every one of the terms for the various components and also dimensions actually confusing. This post is developed to assist you if you are trying to select a drill and should comprehend exactly what all the terminology as well as lingo ways.
Components Found on Column Drills
Pierce head-- the setting up that composes the chuck, pin, drill little bit, motor as well as sheaves.
Base-- the hefty "foot" of the machine that is bolted to the floor when it comes to a bigger pillar drill or the workbench when it comes to a smaller bench-mounted drill.
Column-- this is the vertical pillar that provides the column drill one of its names (confusingly, its various other common names are "bench drill" and also "pierce press").
Pin-- the vertical axle that is in line with the drill bit as well as connects the chuck to the drill head.
Chuck-- the assembly that fits into the pin and holds the drill little bit.
Table-- this is sometimes bit more than a walk in smaller sized bench drill models. It's the assistance for the work piece to be pierced, and also is affixed to the column some range below the head as well as above the base. Tables can be rectangle-shaped or round, and also some can be slanted to permit tilted boring through a work item. Pillar drill accessories can be gotten to clamp or cradle work pieces in various angles.
Depth gauge-- a setting that makes it possible for the bench drill to pierce a hole part-way through a work item.
The Meaning of Dimensions in Drill Specs
Throat range-- this is the measurement from the local side of the pillar to the pin centre.
Swing-- this is a common measure of the capacity of pillar drills and also is defined as twice the throat distance, or to put it an additional method, the optimum size of disc where you can pierce a main opening.
Spindle taper-- this defines the form of the end of the spindle. There are long, brief, female and male types. The chuck should be compatible with the spindle taper.
Collar Diameter-- this is the external diameter of the collar or chuck setting up that holds the little bit.
Chuck size-- this is the size of the inner opening of the chuck setting up, so it specifies the maximum dimension of bit stem that the drill can take. Due to this it is additionally understood simply as the boring capacity.
Spindle traveling-- this is the amount through which the spindle can be decreased or elevated up and down and also defines the optimum depth of hole you could drill in one pass.
Optimum distance spindle-to-table-- this range defines the inmost job item that you can get onto the table.
Optimum range spindle-to-base-- this is similar to the above and defines the maximum deepness of job item you could drill with the table eliminated.
Components Found on Column Drills
Pierce head-- the setting up that composes the chuck, pin, drill little bit, motor as well as sheaves.
Base-- the hefty "foot" of the machine that is bolted to the floor when it comes to a bigger pillar drill or the workbench when it comes to a smaller bench-mounted drill.
Column-- this is the vertical pillar that provides the column drill one of its names (confusingly, its various other common names are "bench drill" and also "pierce press").
Pin-- the vertical axle that is in line with the drill bit as well as connects the chuck to the drill head.
Chuck-- the assembly that fits into the pin and holds the drill little bit.
Table-- this is sometimes bit more than a walk in smaller sized bench drill models. It's the assistance for the work piece to be pierced, and also is affixed to the column some range below the head as well as above the base. Tables can be rectangle-shaped or round, and also some can be slanted to permit tilted boring through a work item. Pillar drill accessories can be gotten to clamp or cradle work pieces in various angles.
Depth gauge-- a setting that makes it possible for the bench drill to pierce a hole part-way through a work item.
The Meaning of Dimensions in Drill Specs
Throat range-- this is the measurement from the local side of the pillar to the pin centre.
Swing-- this is a common measure of the capacity of pillar drills and also is defined as twice the throat distance, or to put it an additional method, the optimum size of disc where you can pierce a main opening.
Spindle taper-- this defines the form of the end of the spindle. There are long, brief, female and male types. The chuck should be compatible with the spindle taper.
Collar Diameter-- this is the external diameter of the collar or chuck setting up that holds the little bit.
Chuck size-- this is the size of the inner opening of the chuck setting up, so it specifies the maximum dimension of bit stem that the drill can take. Due to this it is additionally understood simply as the boring capacity.
Spindle traveling-- this is the amount through which the spindle can be decreased or elevated up and down and also defines the optimum depth of hole you could drill in one pass.
Optimum distance spindle-to-table-- this range defines the inmost job item that you can get onto the table.
Optimum range spindle-to-base-- this is similar to the above and defines the maximum deepness of job item you could drill with the table eliminated.
For More Information About Casing Drilling, Mud Saver Valve, Drilling With Casing, Casing Running
Tool Video,
Tubular
Running Equipment,
Casing
Running Equipment,
Casing
Cementing Head,
Casing
Running Tool For Sale,
Casing
Running Oilfield,
Power Tong
Contact Us:
Address: 10555 FM 1301, Boling-Iago, TX
77420, USA
Ph: +1 979-657-1216
